|
Amsoil Series 2000 Synthetic Racing Grease
 |
Unbeatable high-speed/high temperature performance
AMSOIL Series 2000 Racing Grease protects wheel bearings
and chassis from the dangerous, damaging heat created by
hot pavement, huge engines and the unceasing friction of
intense speed. It is ideal for all high temperature/high
speed applications.
Product Code: GRG
|
Load Capacity
AMSOIL Series 2000 Racing Grease is an extreme-pressure multi-purpose
grease formulated for high-temperature/high-speed applications.
Yet, it excels in the protection of low-speed bearings, a job usually
reserved for heavy-duty products. Components get the load bearing
capacity of a heavy-duty grease without sacrificing the high-temperature
protection of a multi-purpose.
Anti-Wear Performance
AMSOIL Series 2000 Racing Grease passes the Ford Film Strength
Endurance Test with a 16 point margin (see graph). Most nonsolid-fortified
racing greases, synthetic or conventional, do not pass. AMSOIL Series
2000 Racing Grease keeps greased components in like-new condition.
All-Temperature Protection
AMSOIL Series 2000 Racing Grease pairs a high Viscosity Index synthetic
base oil with a top-quality lithium complex thickener, known for
its extraordinary performance in temperature extremes. AMSOIL Series
2000 Racing Grease offers excellent low-temperature pumpability
and high-temperature consistency for dependable all-temperature
protection.
Oxidation Resistance and Inhibition
AMSOIL Series 2000 Racing Grease’s excellent oxidation resistance
and robust package of oxidation inhibitors prevent grease breakdown
and component surface damage in the highly oxidizing conditions
associated with high temperature operations.
Friction Reduction
AMSOIL Series 2000 Racing Grease maximizes power through-put and
fuel efficiency by minimizing friction. The extra power given by
Series 2000 improves acceleration and top-end speed.
Washout Resistance and Corrosion Inhibition
AMSOIL Series 2000 Racing Grease resists water wash out and inhibits
rust and other forms of corrosion.
Applications
AMSOIL Series 2000 Synthetic Lithium Complex Racing Grease meets
the highest performance standards of the National Lubricating Grease
Institute, GC for wheel bearing applications and LB for chassis
applications.
Typical Technical Properties
| AMSOIL Synthetic
Lithium Complex Racing Grease |
NLGI
GC-LB |
Series 2000
Racing Grease |
| Thickener |
NR* |
Lithium Complex |
| NLGI Consistency Grade |
NR* |
2 EP |
| NLGI Performance Grade |
NR* |
GC-LB |
| Penetration (ASTM D-217) 25° C [77°
F], 0.1 mm Worked 60 strokes |
220 - 340 |
265 - 295 |
| Dropping Point (ASTM D-566) °C [77°
F] |
220 [428] |
285 [545] |
| Water Washout (ASTM D-1264) 79° C
[175° F] % loss |
15 max |
5.1 |
| Oil Separation (ASTM D-1742) 24 hr.
@ 25° C [77° F], % loss |
10 max |
2.8 |
| Rust Protection (ASTM D-1743) |
pass |
pass |
| Timken OK Load Test (ASTM D-2509),
lbs. |
NR* |
60 |
| Fortified with Moly Compound |
NR* |
no |
| Four Ball Wear Test (ASTM D-2266)
Wear Scar Diameter, mm |
0.9 max |
0.32 |
| Compatibility with other greases |
NR* |
excellent |
| Extreme Pressure, Four Ball Method
(ASTM D-2596) Weld Point, kgf |
200 min |
400 |
| Extreme Pressure, Four Ball Method
(ASTM D-2596) Load Wear Index, kgf |
30 min |
65 |
| High Temperature Life (ASTM D-3527)
hours |
80 min |
300 |
| Fretting Wear (ASTM D-4170)* mg |
10 max |
3.4 |
| Elastomer Compatibility (ASTM D-4289)
Volume Change, %, GC |
-5 to +30 |
21.6 |
| Elastomer Compatibility (ASTM D-4289)
Volume Change, %, LB |
0 to +30 |
9.88 |
| Elastomer Compatibility (ASTM D-4289)
Hardness Change, durometer-A points, GC |
+2 to -15 |
-3 |
| Elastomer Compatibility (ASTM D-4289)
Hardness Change, durometer-A points, LB |
0 to -10 |
-6 |
| Leakage (ASTM D-4290), G* |
10 max |
6.0 |
| Low Temperature Torque (ASTM D-4693)
n·m, max @ -40° C [-40° F] |
15.5 |
2.3 |
| Water Spray Off (ASTM D-4049), % max |
NR* |
22.7 |
| * NR: Not Required for
NLGI GC or LB labeling |
|
